Airport Engineering Mcqs

1.

An airport has 4 gates. If the weighted average gate occupancy time is 30 minutes and gate utilisation factor is 0.5, then the capacity of the gate will be___________________?

A. 1 aircraft per hour

B. 2 aircrafts per hour

C. 4 aircrafts per hour

D. 16 aircrafts per hour

Answer & Solution Discuss in Board

2.

The engine failure case for determining the basic runway length may require________________?

A. only clearway

B. only stop way

C. either a clearway or a stopway

D. either a clearway or a stopway or both

Answer & Solution Discuss in Board

3.

If the monthly mean of average daily temperature for the hottest month of the year is 25° C and the monthly mean of the maximum daily temperature of the same month of the year is 46° C, the airport reference temperature is____________________?

A. 32°C

B. 35.5°C

C. 48°C

D. 25°C

Answer & Solution Discuss in Board

4.

As per ICAO recommendation, the rate of change of longitudinal gradient per 30 m length of vertical curve for A and B type of airports is limited to a maximum of__________________?

A. 0.1 %

B. 0.2%

C. 0.3 %

D. 0.4%

Answer & Solution Discuss in Board

5.

As per International Civil Aviation Organization (ICAO) recommendation, minimum width of safety area for instrumental runway should be_________________?

A. 78 m

B. 150 m

C. 300 m

D. 450 m

Answer & Solution Discuss in Board

6.

The minimum width of clearway is_______________?

A. 50 m

B. 100 m

C. 150 m

D. 250 m

Answer & Solution Discuss in Board

7.

The total length of a runway is 1000 m. The elevation at distance 0,200 m, 400 m, 600 m, 800 m and 1000 m are 100.0 m, 99.2 m, 101.0 m, 101.8 m, 101.4 m and 101.0 m respectively. The effective gradient of runway will be______________?

A. 0.10%

B. 0.26%

C. 0.43 %

D. 0.65%

Answer & Solution Discuss in Board

8.

The capacity of parallel runway pattern depends upon______________?

A. weather conditions and navigational aids available

B. lateral spacing between two runways and weather conditions

C. lateral spacing between two runways and navigational aids available

D. lateral spacing between two runways, weather conditions and navigational aids available

Answer & Solution Discuss in Board

9.

As per ICAO, for A, B, and C type of airports, maximum effective, transverse and longitudinal grades in percentage respectively are______________?

A. 1.0, 1.5 and 1.5

B. 1.0, 1.5 and 2.0

C. 1.5, 1.5 and 2.0

D. 2.0, 2.0 and 2.0

Answer & Solution Discuss in Board

10.

The length of runway under standard conditions is 2000 m. The elevation of airport site is 300 m. Its reference temperature is 33.05°C. If the runway is to be constructed with an effective gradient of 0.25 percent, the corrected runway length will be________________?

A. 2500 m

B. 2600 m

C. 2700 m

D. 2800 m

Answer & Solution Discuss in Board

Practice MCQ Questions and answers on Airport Engineering Mcqs

1. An airport has 4 gates. If the weighted average gate occupancy time is 30 minutes and gate utilisation factor is 0.5, then the capacity of the gate will be___________________?

Answer & Solution

2. The engine failure case for determining the basic runway length may require________________?

Answer & Solution

3. If the monthly mean of average daily temperature for the hottest month of the year is 25° C and the monthly mean of the maximum daily temperature of the same month of the year is 46° C, the airport reference temperature is____________________?

Answer & Solution

4. As per ICAO recommendation, the rate of change of longitudinal gradient per 30 m length of vertical curve for A and B type of airports is limited to a maximum of__________________?

Answer & Solution

5. As per International Civil Aviation Organization (ICAO) recommendation, minimum width of safety area for instrumental runway should be_________________?

Answer & Solution

6. The minimum width of clearway is_______________?

Answer & Solution

7. The total length of a runway is 1000 m. The elevation at distance 0,200 m, 400 m, 600 m, 800 m and 1000 m are 100.0 m, 99.2 m, 101.0 m, 101.8 m, 101.4 m and 101.0 m respectively. The effective gradient of runway will be______________?

Answer & Solution

8. The capacity of parallel runway pattern depends upon______________?

Answer & Solution

9. As per ICAO, for A, B, and C type of airports, maximum effective, transverse and longitudinal grades in percentage respectively are______________?

Answer & Solution

10. The length of runway under standard conditions is 2000 m. The elevation of airport site is 300 m. Its reference temperature is 33.05°C. If the runway is to be constructed with an effective gradient of 0.25 percent, the corrected runway length will be________________?

Answer & Solution

Read More Section(Civil Engineering Mcqs)

1.

An airport has 4 gates. If the weighted average gate occupancy time is 30 minutes and gate utilisation factor is 0.5, then the capacity of the gate will be___________________?

2.

The engine failure case for determining the basic runway length may require________________?

3.

If the monthly mean of average daily temperature for the hottest month of the year is 25° C and the monthly mean of the maximum daily temperature of the same month of the year is 46° C, the airport reference temperature is____________________?

4.

As per ICAO recommendation, the rate of change of longitudinal gradient per 30 m length of vertical curve for A and B type of airports is limited to a maximum of__________________?

5.

As per International Civil Aviation Organization (ICAO) recommendation, minimum width of safety area for instrumental runway should be_________________?

6.

The minimum width of clearway is_______________?

7.

The total length of a runway is 1000 m. The elevation at distance 0,200 m, 400 m, 600 m, 800 m and 1000 m are 100.0 m, 99.2 m, 101.0 m, 101.8 m, 101.4 m and 101.0 m respectively. The effective gradient of runway will be______________?

8.

The capacity of parallel runway pattern depends upon______________?

9.

As per ICAO, for A, B, and C type of airports, maximum effective, transverse and longitudinal grades in percentage respectively are______________?

10.

The length of runway under standard conditions is 2000 m. The elevation of airport site is 300 m. Its reference temperature is 33.05°C. If the runway is to be constructed with an effective gradient of 0.25 percent, the corrected runway length will be________________?